Configuring the lan_ip_pbx_ca Call Agent

Context

If you are not familiar with the meaning of the fields and buttons, click Show Help, located at the upper right corner of the Web page. When activated, the fields and buttons that offer online help will change to green and if you hover over them, the description will bedisplayed.

Steps

1. Go to SBC/Configuration.
2. In the Call Agent Configuration table, click next to lan_ip_pbx_ca.
3. In the Configure Call Agent table, complete the fields as follows:
   1. Select the Enable check box.
   2. From the Signaling Interface selection list, select pbx_s.
   3. From the Media Interface selection list, select pbx_m .
   4. Set the Peer Host to IP address of the IP PBX.
4. Click Save.
5. Click Apply to apply all changes to the configuration.

Result

No will be displayed in the Config.Modified field, indicating that the configuration that was modified is now applied to the system. When the Mediatrix SBC will use the selected Call Agent for a communication, the selected parameters will be applied.